If you have questions regarding our company and the hardwood floor sanding service we provide for our clients in Orlando, FL, here, you can find the answers needed. If you still cannot see the answers you are looking for, you are more than welcome to give Absolutely Hardwood Flooring a call at (407) 883-4046 for more information. We will answer all your questions!
Q: How long does the hardwood floor sanding take?
A: The wood floor sanding goes through three phases with both the edger and drum sander, and it usually goes for around 5 hours. The time may vary, depending on how big your property is.
Q: The belt/drum sander does not reach the edges of my floor. How to fix that?
A: Those discs are used on a hand-held machine to perfectly blend the sanded floor with the rest of the floor. It’s necessary in order to avoid a “picture framing” effect when the stain is applied on it. With this said, you should never try to make the cuts more aggressively by applying extra pressure to the front end. This surely leads to marks and ridges which are extremely difficult to remove.
Q: If my wooden floor is cupped, uneven, or crowned, should I use different methods to sand it?
A: If the wooden floor is crowned, uneven, or cupped, make sure the first rough sanding procedure is at 45° to the direction of your floor. If you don’t know how to do it properly, you can always give us a call. We do an excellent job every time, and our clients are always happy with the end result!
Q: I need a hardwood floor sanding service provider but I am on a tight budget. Should I still choose your company as a service?
A: Don’t worry, we guarantee nothing but affordable prices and quality sanding results! In no time, we will bring the aesthetic look you want to achieve in your property!
Q: What type of sandpaper roll or sheet is perfect for sanding?
A: Using too rough grit can lead to costly damage. This is why you should use the finest grit possible. This way, you will not have to spend much time trying to remove the scratch marks and reducing the thickness of your flooring.
Q: How to mount the floor sanding covers or sheets more easily?
A: To mount them, you should place a screen sheet or paper on the floor, and after that, place the non-woven pad on top. Then, you must tilt the machine to a 45-degree angle and lower it on top of the pad.
Q: Can I use a belt sander to edge floors?
A: To go through the edging easier, the belt sander must be used between kitchen islands and along wall joints. Use a fine, nothing coarser than an 80 grit paper, and low-pressure drum. This way, you will remove most of the finish without leaving deep scratches.
Are you still having trouble finding the answers to your questions regarding our hardwood floor sanding company in Orlando, FL? If so, you are more than welcome to give Absolutely Hardwood Flooring a call, and we will be more than happy to answer all your questions! We are looking forward to hearing from you!